驅動轉矩 的英文怎麼說

中文拼音 [qūdòngzhuǎnjǔ]
驅動轉矩 英文
drive torque
  • 驅 : 動詞1. （趕） drive （a horse, car, etc. ） 2. （快跑） run quickly 3. （趕走） expel; disperse
  • 轉 : 轉構詞成分。
  • 矩 : 名詞1. （畫直角或正方形、矩形用的曲尺） carpenter's square; square2. （法度; 規則） rules; regulations 3. [物理學] moment
  • 驅動 : [機械工程] drive; prime mover
  1. The magnetic suspension bearingless motors generate both electromagnetic torque and magnetic levitation forces for the rotor suspension by the motor itself. the bearingless motor is comparatively suited for using as artificial heart blood pump motor due to the advantages of without mechanical wear and noise, structure compact and contactless

    磁懸浮無軸承電機定、轉子既用於產生驅動力矩，同時又用於產生支撐轉子的磁懸浮力，具有無機械磨損、噪音小、可高轉速和體積小等特點，比較適用於人工心臟血泵電機。
  2. After analysing several kinds of light - weighting structures through ansys, hexagonal speculum structure is confirmed. in the aspect of the controling of speculum, the paper adopts the brushless dc motor which is partial assembled to drive the point speculum and the inductosyn as angle measuring component is selected, the ad2s80a the system is used to get directly angle and angular velocity. double closed - loop speed and position control is designed, as the pid control is the well - developed algorithm, which can achieve stable rotation and precise position control

    在指向反射鏡的擺動控制方面，採用低速性能好的分裝式直流力矩電機作為指向反射鏡的驅動電機，並採用感應同步器作為角度測量元件，運用軸角轉換器ad2s80a進行角度和速度的輸出，採用技術成熟的pid控制方案，進行速度和位置雙閉環控制，以實現指向反射鏡轉動速度的平穩性和位置的精確性。
  3. Being a sort of new principle micromotor in the fronitier of science. the ultrosonic motor ( usm ) is developed at recently twenty years. utilizing the stator surface particle elliptical motion excited by piezoceeramics, the usm is drived by friction force between the stator and rotor. compared with the conventional electromagnetic motor, the ultrasonic motor has the following features : high speed, high holding torque when power is off and so on. because of it ' s characteristics, the ultrasonic motor has obtained some widespread application in robots, precise instrument, house electronical appliance, sapceecraft automobile and micromechanism

    超聲波電機（ ultrasonicmotor ）是近二十年來發展起來的一種新原理電機，其原理不同於傳統的電磁型電機，它是利用壓電陶瓷的逆壓電效應使定子的表面質點產生橢圓運動，通過定子和轉子之間的摩擦力驅動轉子運動。這種新型的電機與傳統電磁電機相比，具有響應快、不受電磁干擾、結構緊湊、低速、大扭矩、斷電自鎖等優點，因而在微型機械、機器人、精密儀器、家用電器、航天器、汽車等方面顯示出廣泛的應用前景。
  4. While the compressed electret micromotor adopt top - drive structure, the output torque of it is larger than that of side - drive structure

    扁平駐極體微電機採用項驅動型結構設計，此結構電動機的輸出轉矩比側驅動型靜電電動機要大。
  5. For a sports car that is quick ( not the same as fast ) and provides driver fun, a different concept is needed : mid - engined, rear wheel drive ( initial slight understeer changing to oversteer by applying engine torque - power oversteer / steering with the throttle )

    對于提供高速和駕駛樂趣的跑車來說，需要一個不同的概念：中置引擎，后輪驅動（初始狀態下的輕微的轉向不足在被施加了引擎的扭矩之後變為轉向過度） 。
  6. This paper presents our research in actuating in - vivo micro - robot based on the capsule endoscope platform by the external power. while seeking secure driving method we take several factors into account, such as driving environment, power transmitting and consuming, motion requirement and controllability, and locating technique. we mainly deal with driving the capsule with spatial gradient magnetic field, so we employ combined electro - magnetic coils, including gradient coils and homogenous coils, which have rotational dof around a translatable patient bed, to compose a controllable uniform gradient which act on the permanent - magnet embedded robot, thereby get an appropriate spatial force and torque to fulfill the anticipant locomotion such as move, stop, pitch and yaw

    基於驅動環境、能量供給和消耗、驅動動作要求及驅動安全性與可控性，定位方案等多方面考慮，尋求安全可靠的腸胃檢查微機器人的外部驅動控制方法，並著重研究直接利用外磁場磁力驅動微機器人:在微機器人內部嵌入永磁性體，利用體外的組合電磁線圈產生加載電流控制的驅動磁場，其中外部的電磁線圈由多組梯度線圈和勻場線圈組合構成，通過繞病床的旋轉以及病床的平移共同控制微機器人所在位置的磁場強度及梯度，作用於微機器人內嵌磁體以獲得空間意義上的必要驅動力和調整轉矩，從而有效地完成驅動動作要求。
  7. Permanent magnet synchronous motor ( pmsm ) drived by triphase sinusoidal current is research object in this paper. its mathematics models in several coordinate are set up, controlling principles of flux linkage and torque are discussed under dtc and the block diagram of pmsm with dtc is presented

    本文以三相正弦波驅動的永磁同步電機（ pmsm ）為研究對象，建立了其在不同坐標系下的數學模型，並深入探討直接轉矩控制中永磁同步電機的磁鏈和轉矩的控制思想，給出控制方案。
  8. For the bldcm which has a general crest width of the back - emf waveform, two kinds of torque ripple conditions when drived by sine - wave current as well as by square - wave current are deduced based on the mathematical models. in addition, a comparison is carried out between these two conditions, which indicates that sinusoidal current driving is more favorable to minimizing the torque ripple when the crest width of the back - emf waveform is less than a certain value

    闡述了抑制齒槽轉矩措施對反電動勢波形的影響，利用無刷直流電機的數學模型推導並比較了任意平頂寬度梯形波反電動勢在正弦波和矩形波兩種電流驅動下的電磁轉矩脈動情況，得出在梯形波平頂寬度減小到一定數值后採用正弦電流驅動更有利於減小電磁轉矩脈動。
  9. This dissertation mainly investigates some robust control strategies of the electromechanical actuator which is supposed to be activated by the sinusoidal permanent magnet synchronous motor ( pmsm ) and limited angle torque motor ( latm )

    本文主要研究了基於正弦波永磁同步電機（ pmsm ）及有限轉角力矩電機（ latm ）驅動的電動舵機的魯棒控制策略。
  10. As novel concept actuators, ultrasonic motors have been attracting intensive attention at home and abroad with their outstanding features such as low speed and high torque, large holding torque, rapid response, light weight and compact sizes, simple structure, and no magnetic disturbance, etc. traveling wave ultrasonic motors are especially attracting researchers ’ interest for their good controllability and flexible constructions

    超聲波馬達作為一種全新的驅動器，以低速大轉矩、靜態保持力矩大、響應速度快、體積重量小、結構簡單以及無磁場干擾等優點受到國內外的廣泛關注，其中行波超聲波馬達以其控制性能良好和結構靈活等優點尤為引人矚目。
  11. A mathematic model of the motor is builded and emulated through matlab. the low - speed and constant - torque, high - speed and constant - power state is analyzed and researched, also the software approach of simulation to the driver has been done, a digital signal processor tms320lf2407 is developed successfully to control the perm square - wave bldcm driving airscrew of solar powered unmanned engine. it is useful to the further study

    在matlab下建立了電機的數學模型，通過計算機模擬，驗證了數學模型的正確性，同時在理論上對低速恆轉矩高速恆功率運行進行了分析與研究，提出了一種用模糊控制的方法實現恆功率控制，並對驅動器進行了系統模擬，成功的研製了以數字信號處理控制器tms320lf2407為控制核心的驅動器，控制無刷直流電動機驅動太陽能無人飛機的螺旋槳，為後面繼續研究工作提供了參考。
  12. By analyzing the running speed of two - wheels, three - wheels, four - wheels project, adopting small three - wheels project with two independent driving and veering system. based on these, we can calculate the driving power of the agv, the twists of the motor and the storage battery capacity. 4

    通過對兩輪、三輪和四輪小車方案的運動速度的分析和比較，採用兩輪獨立驅動、差速轉向的三輪小車設計方案，並對小車驅動功率、電機扭矩和蓄電池容量進行了計算。
  13. Brief introduction the model kx920 wheel is one of the series leading products made in our works that is well received both at home and abroad for its reaso - nable design, beautiful contour, and advanced norms. by adopting of three - ele ment torque converter, fixed - axle type pcwer shifing transimission box, in = bub reduction, double - axle drive, hinged frame, all hydraulic steering, and clamping brade. the loader has such features as : large power reseve, fi - neaccelerating performace, comfortable operation, wide field of vision, it " s muti = function, high - effic ient and flexible engineering machinery. mor - eover, it can be equipped with many kinds of working attachments such as flat fort, muti - fnction bucket, and snow plow, so it may be used for loading and unloading, transporting, piling and leveling materials in various kinds of projects. mines, enterprises and city. welcome friends both at ho - me and abroad to visit our factory and to order our products

    Kx920裝載機是我公司生產的系列主導產品之一，該機設計合理，外形美觀，指標先進，在國內外享有盛譽.它選用三元件液力變矩器，定軸式動力換檔變速箱，輪邊減速，雙橋驅動，鉸接式車架，全液壓轉向，汽液鉗盤式四輪制動，手動鉗盤式停車制動，反轉連桿機構，動力儲備大，加速性能好，駕駛舒適，視野寬廣，是一種用途廣，效率高，機動靈活的工程機械.備有平叉，圓木叉，多用途斗，推雪板，側翻，抓草機等多種工作裝置，因此廣泛用於各類工程，工礦企業和城鎮的物料，垃圾裝卸，運輸，堆垛，平整等作業，歡迎國內外朋友們來公司參觀，選購
  14. In this paper, the maximum torque per ample ( mtpa ) control in permanent magnet synchronous motor ( pmsm ) direct torque control ( dtc ) driving system was studied

    摘要在永磁同步電動機直接轉矩控制和最大轉矩電流比控制理論基礎上，研究了永磁同步電動機直接轉矩控制驅動系統最大轉矩電流比控制的實現。
  15. This dissertation presents how to use the ultrasonic motor as an actuator to suppress the flutter of a two - dimensional airfoil section with a control surface. the ultrasonic motor, which features simple structure, high torque at low speed, small size, low weight and no electromagnetic contamination, is a promising actuator for the flutter suppression of small aircraft

    超聲電機以其結構簡單緊湊、轉矩/質量比大、低速大扭矩、直接驅動，動態響應快、斷電自鎖和不產生磁場且不受外界磁場干擾等優點，有望成為一種非常有前途的作動器，用於小型飛機的機翼顫振主動抑制。
  16. Firstly, under the assumption that the output driving torque generated by the stepper motor of the mirror is constant, such influence analysis is conducted. secondly, a mathematic model of the stepper motor is given. under the assumtion that the input impulse frequence is constant, the rotational motion of the stepper motor of the mirror with the mutual exertions of damping torque, friction torque and disturbance torque generated by satellite platform ' s attitude motion is simulated and analyzed

    對衛星平臺姿態振動對紅外相機掃描機構轉動的影響進行了系統深入的模擬分析:首先在步進電機驅動力矩一定條件下，模擬分析了星體姿態運動干擾力矩對紅外相機掃描鏡轉動的影響;接著建立了步進電機的數學模型，在步進電機輸入脈沖頻率一定條件下，模擬分析了步進電機在阻尼力矩、干摩擦力矩、平臺干擾力矩等負載轉矩的共同作用下的轉動情況。
  17. Reverse rotating torque of steering gear

    轉向器反驅動力矩
  18. The problem of deriving dynamic model was transformed into the problem of solving driving moment under specified conditions by kinematic and dynamic formulae

    將動力學模型的推導問題轉化為特定條件下運用運動學和動力學計算公式求解機構驅動力矩的問題。
  19. By analyzing the engine driving torque characteristics and the transmission inertia torque while speed ratio is changed under transient condition, a new synthetic control algorithm is developed which can approach engine target torque by compensating engine output torque with transmission system inertia torque

    通過研究無級變速傳動速比變化時的慣性矩，提出了一種新的控制演算法，採用傳動系的慣性矩來補償發動機的輸出轉矩，以獲取目標驅動轉矩。
  20. Series zsn4 dc motors are the new generation of z4 series dc motors with high starting torque and overload. mainly used as the drive equipment for cement rotary kiln

    是在z4系列直流電動機基礎上開發設計的具有高起動轉矩、高過載能力電機，主要應用於驅動水泥回轉窯等設備。
分享友人
分享到 Line

分享到臉書