接觸段 的英文怎麼說

中文拼音 [jiēchùduàn]
接觸段 英文
contact segment
  • 接 : Ⅰ動詞1 （靠近;接觸） come into contact with; come close to 2 （連接; 使連接） connect; join; put ...
  • 觸 : Ⅰ動詞1 （接觸） touch; contact 2 （碰; 撞） strike; hit 3 （觸動） touch 4 （感動） move sb ; sti...
  • 段 : Ⅰ量詞（部分） section; segment; part; paragraph; passage Ⅱ名詞（姓氏） a surname
  • 接觸 : 1. （交往） come into contact with; get in touch with 2. （沖突） engage 3. （挨上; 碰著） contact; touch
  1. This article offers a method for solving the frictional drag, that is, according to the various buckled shapes of coiled tubing in different hole sections, working out the mean contact counterforce in a screw pitch in solving the radial contact counterforce

    求解摩阻力時，可針對連續油管在井身中不同結構段的不同變形形狀，採用求解徑向接觸反力時求一個螺距內平均接觸反力的方法加以解決。
  2. With a view to the contactor counterforce, which was calculated by the combination of spring - force and mechanical construction before, had the problem of mechanical matching. the contactor counterforce " one - off " measurement, which is realized by the synchronization testing of the placement based on opto - mechanism and the spring counterforce for the moving component, is put forward the fist time

    針對現階段接觸器反力特性主要採用彈簧力與機械結構組合的計算方法，存在機械配合性問題，將接觸器光機電位移檢測與可動部件彈簧反力特性檢測同步進行，首次實現了接觸器反力一位移特性的「一次性」測量。
  3. Obviously, the regular crimp wave provides a mechanism for short-range entanglement of the ratchet type.

    雖然，有規則的捲曲波紋能使纖維間短片段內彼此糾纏接觸，產生棘輪式機械作用。
  4. Tracing the activities and contacts of individual disease victims, as snow did, remains an important tool for modern epidemiologists

    如今，像史諾這樣追蹤每位死者的日常活動與所接觸的東西，仍舊是現代流行病學家採用的重要手段。
  5. This was their closest approach to intimacy during their long summer idyll

    在他們這段漫長的詩一樣的夏日生活中，這是他們最親密的一次接觸了。
  6. Compareingthe track programming in joint coordinate with that in cartesian coordinates and analyzing the whole motorial characteristic of the fingers, this dissertation showes method of making track programming in joint coordinate form the start to the near and do in cartesian coordinates from the near to the touch

    比較了在關節空間和笛卡爾空間中規劃的優缺點，分析了整個手指的運動特性，提出從起始點到臨近點階段在關節空間中進行規劃，臨近點到接觸點階段在笛卡爾空間進行規劃的方法。
  7. A child who is allowed to explore with real mathematical objects at an early, motor - sensorial age stands a good chance of becoming a real math lover later in life

    孩子在他的早期以感性認識為主的階段可以接觸到真實的數學物體，能夠使他有更大的機會成為一個真正的數學愛好者。
  8. A new method for measuring the vibration of shadow mask without touch by detecting the light density with reflection type optical fiber sensor is presented. the measurement system based on the new method is designed to make the vibration measurement easier working, faster calculating, and get more precise results. it is an important measurement and analysis tool to improve the performance of shadow mask and display quality of cpt

    本文提出了基於單光纖光強度反射法的非接觸式微振動測量系統的原理，並設計製造了該測試系統，探索出了簡單方便可靠的測量方法，能夠準確客觀地反映蔭罩振動的各項參數（各振動模的振動頻率、振幅、衰減時間） ，實現了測試裝置的簡便化和測試過程的自動化，為cpt張緊式蔭罩系統的性能改進與顯示質量的提高提供了有效的測試分析手段。
  9. I also define each unite of formation and members. including characters of petrology and regional distribution. finally, the stratigraphical framework have been constructed based on consistencies of petrology, facies and the relationships of rock units

    同時對所劃的各組、段的特徵、含義進行了詳細描述，最後依據巖性巖相特徵、地層接觸關系等，進行了區域對比，建立了該區石炭系的巖石地層格架。
  10. Lots of useful data on tangency ratio of joints in several normal conditions can also be found in this paper

    通過實驗手段給出了幾種工程實際條件下的結合面的相對接觸比。
  11. And the generalized homothetic composite action of metallogenic subsystems mentioned above formed the multiple - composite metallogenic system of the jiangda tectonic belt. the typical ore deposits of jiangda tectonic belt, such as dingqinnong, jiaduoling, renda etc, are contact metasomatic type deposits formed intracontinental rifting stage, and the tectonic - magmatic - hydrotherm of intracontinental orogenic stage superposed and rebuilt some preexistent ore body. their space distribution is controlled by composite intrusive rock belt of ne direction

    對丁欽弄、加多嶺、仁達等典型礦床的研究表明，它們均為形成於陸內裂谷作用階段的接觸交代型礦床，陸內造山期的構造?巖漿?熱液作用疊加改造了先成礦體，礦床空間分佈受北東向復合侵入巖帶控制。
  12. 4. simulation model for capture and buffer phase is built based on adams software, in the model, capture ring is accurately built with full consideration of actual geometrical feature, buffer system is modeled the same as that of ddss, and adams impact model

    4 .建立了捕獲段與緩沖段的adams模擬模型，其中對接機構採用精確的實體三維模型，緩沖力模型同上，接觸力採用adams軟體提供的的impact模型。
  13. Principal conclusions were drawn as the following : the non compatibility of pressure or velocity of the gas on both sides of the contact surface is the cause of the formation of shock wave ; the heating effect of reflective shock wave to driving gas during charging or exhausting process is the internal mechanism of peak oscillating effect, and all the factors that influence the formation and the running of the shock wave will influence the peak oscillating frequency, cooling effect

    主要結論如下：熱分離機內激波形成的原因是射氣瞬間接觸面兩側壓力和速度不相容；峰值振蕩效應的內在機制為反射激波對充氣階段的驅動氣或低溫排氣的加熱，凡是影響激波形成及運動的因素都將對峰值振蕩頻率、冷效應及熱效應產生影響；當充、排氣時間比為0 . 1763時，最佳射流激勵頻率出現在高階峰值振蕩頻率上。
  14. Then an thorough computer modeling using finite element program with material, geometry and state triple - nonlinear taken into account is carried out on a series of influencing factors, such as comparison with npn - beam splice connection, comparison of varies designed theories, and the varying of fraction coefficient, diameter, grade, pretension and arrangement of bolts, thickness of web and flanges of beam and column, splicing location, axial loading on column, etc. lots of useful conclusions are drawn form computer modelling. finally, design and construction suggestions are given out. this study fills the black in the field of steel beam - to - column connection with cantilever beam high - strength bolted - splicing at both home and abroad

    然後，本文在考慮材料、幾何和狀態三重非線性的基礎上，對該連接形式進行了全面的計算機模擬，主要考慮了帶懸臂梁段全螺栓拼接的樑柱連接節點與無拼接的樑柱連接及翼緣對接焊接腹板拼接的連接節點的對比，各種設計方法之間的對比，以及翼緣拼接和腹板拼接的螺栓間距、直徑和數量，拼接點與梁端之間的距離，梁和柱的翼緣、腹板厚度，柱的軸力，接觸面的摩擦系數，翼緣和腹板拼接板的厚度等因素的影響。
  15. The coloring material results from contact of the water with organic debris, such as leaves, needles of conifers and wood, an in various stage of decomposition.

    著色物質是由水與有機殘渣，如樹葉、針葉樹的針葉和木材，以及所有這些物質在各個階段的分解產物相接觸而產生的。
  16. In the thesis, 3d finite element, models ( fem ) of the precast segmental box girders are established with contact elements, which may simulate the interactions between the joints. the influences of material nonlinearity of concrete and geometric nonlinearity of structure are also taken into account in the computed models

    針對預制節段干接縫拼裝梁存在接縫的特點，採用接觸單元模擬接縫間的相互作用，解決了預制節段拼裝梁建模的關鍵問題，並在計算模型中考慮了混凝土材料非線性和結構幾何非線性的影響。
  17. Copper - nanosized tibi composites were prepared by in - situ process. the microstructure, mechanical and electrical properties, and dry sliding wear behavior and electric sliding wear of cu - nanosized tib _ 2 in - situ composites was investigated ; mostly task as follows : the thermodynamic data for the reactions between b and ti in the molten liquid of copper were analyzed, the copper matrix composites reinforced by in - situ tibi nanoparticles were prepared by reactions of 8263, carbon and titanium in copper - titanium melt, and copper - titanium, copper - boron in alloy melt, respectively, which controlled the reaction temperature, reaction time and solidification process. the rnicrostructure and mechanical and electrical properties of the in - situ composites were investigated by using optics microscope, tem and xrd

    本文採用原位反應法制備了cu -納米tib _ 2原位復合材料，在此基礎上分析了原位復合材料的微結構，進行了干滑動摩擦磨損和電接觸滑動磨損實驗，完成的主要工作如下：從熱力學的角度出發，分析了陶瓷tib _ 2顆粒在銅基體中原位生成的熱力學條件，並用電解銅、工業純鈦、 b _ 2o _ 3 、 c （還原劑）以及cu - ti 、 cu - b等合金為原料，通過控制適當的反應溫度、反應時間和快速凝固等工藝手段，制備了cu -納米tib2原位復合材料。
  18. Besides, it was founded that the compatible of the system consisted of mts - mma copolymer and pmma was better than that of pmts / pmma

    應用dma ， dsc ， uv及水滴接觸角等測試手段表徵了有機硅聚合物-聚甲基丙烯酸酯梯度膜的性能。
  19. Using vogel ' s wear index as the rail side wear index, the paper analyzes the side wear variations of rail head when the parameters in the wheel / rail system vary, analyzes the influences of track irregularity on rail uneven wear on gauge corner emphatically. this paper analyzes the rail side wear dates measured by track division of shan hai guan since 1990, then gains the relationship between side wear and traffic volume and sums up the characteristics and regularities in the formation and development of side wear. in the end, some measures for regarding the side wear on curves are put forward

    從輪軌摩擦、輪軌接觸幾何關系、輪軌接觸應力和輪軌蠕滑等方面對鋼軌側面磨耗機理進行了探討，從軌道幾何參數、機車車輛運營條件等方面對鋼軌側面磨耗的影響因素進行了重點分析和總結；應用輪軌系統動力學，建立了輪軌空間耦合振動時變模型，採用vogel側磨指數作為鋼軌側磨指標，系統分析了輪軌參數變化的情況下，軌頭側面磨耗的變化規律，重點分析了軌道不平順對鋼軌不均勻側磨的影響；對山海關工務段1990年以後現場測得的曲線鋼軌側磨數據進行了分析，通過擬合得到了鋼軌側磨量與運量的關系曲線，並總結了曲線上股鋼軌側面磨耗的特徵和發生、發展規律；最後提出了一些減緩曲線鋼軌側面磨耗的措施。
  20. The interface behavior between essence and ethylene - vinyl acetate copolymer pallets was studied so that necessary data were obtained to guide the preparation of fragrant masterbatch. the adsorption type and wettability between essence and the copolymer pallets were analysed by measurements of fourier transform infrared spectrum, surface tension, contact angle and specific surface area. the technical factors affecting absorptivity such as the charge ratio, temperature, pressure and stirring speed were studied by series of adsorption experiments. the results showed that the adsorption of essence on the surface of ethylene - vinyl acetate copolymer pallets is physical in nature. essence couldn ' t moisten the surface of ethylene - vinyl acetate copolymer pallets absolutely, but it could be soaked into the surface of the pallets partly. adsorptivity could be increased by enhancing the temperature, pressure and stirring speed, but the extension of adsorption time had little influence on adsorptivity

    研究了香精與乙烯/醋酸乙烯共聚物粒子之間的界面行為，以便為香型母粒的制備提供必要的理論依據.利用傅立葉變換紅外光譜、表面張力、接觸角及比表面面積等測定手段，分析了香精與載體之間的吸附類型和潤濕作用.並通過一系列吸附實驗，討論了配料比、溫度、壓力、攪拌等工藝條件對吸附量的影響.結果表明，香精在乙烯/醋酸乙烯共聚物粒子表面的吸附為物理吸附；香精無法完全潤濕載體粒子表面，但可以對其形成部分浸潤；提高溫度、壓力、攪拌速度可以增加吸附量，而延長吸附時間對增加吸附量貢獻不大
分享友人
分享到 Line

分享到臉書