進入饋線 的英文怎麼說

中文拼音 [jìnrùkuìxiàn]
進入饋線 英文
incoming feeder
  • 進 : 進構詞成分。
  • 入 : Ⅰ動詞1 （進來或進去） enter 2 （參加） join; be admitted into; become a member of 3 （合乎） conf...
  • 饋 : 動詞（饋贈） make a present of
  • 線 : 名詞1 （用絲、棉、金屬等製成的細長的東西） thread; string; wire 2 [數學] （一個點任意移動所構成的...
  • 進入 : get into; enter; entry; entering; entrance; incoming; dipping; ingress; intro-
  • 饋線 : [電工] feeder line; feeder; supply line; feed line; transmission line饋線電纜 [訊] feeder cable; ...
  1. Finally, a feedback control system of neural network was designed and a special learning method was produced to train the neural network which was applied in the non - linear model of semi - active suspension. the result of test showed ride comfort and handling was improved preferably after the control, and the semi - active suspension system harmonized the vehicle performance with the controller

    最後，設計了神經網路反饋控制系統，採用一種特殊學習（直接學習）方法對其進行訓練，並將其應用於半主動懸架非線性模型的模擬驗證，通過對多種路面激勵輸入條件下的模擬分析表明：該神經網路反饋控制系統可以較好地提高車輛的乘坐舒適性和操縱穩定性，採用這種神經網路反饋控制的半主動懸架，可以較好地協調車輛性能。
  2. The automation of coal flotation has been wandering for many years in china. the production efficiency is relatively low because of the feed forward control which adds the flotation reagent based on the fine coal in feed slurry, ignoring the quantity and quality of the products. aiming at this problem, method of measuring the flotation technical parameters was studied, the slurry level meter and the slurry ash - measuring device were worked out, and the computer control system of the coal flotation was designed. the feedback control was realized by using the fuzzy logic control control technology to regulate the reagent addition and the slurry level in the flotation tank according to the concentrate ash content detectedby the coal slurry ash - measuring device developed. the industrial experiment indicates that the performance inedxes of the coal slurry ashmeasuring device have come up to the advanced levek of the world. the application of the detection and control system in huaibei coal preparation plant results in a high concentrate recovery, a decrease of the reagent consumption, ensuring a highly efficient operation

    浮選自動化在我國多年來徘徊不前，一直採用根據入浮煤漿中的干煤泥量來確定加藥量的前饋控制方法，而不直接以產品的數質量指標作為控制目標，導致浮選生產效率較低.針對上述問題，研究了浮選工藝參數的檢測方法，開發了浮選漿位儀和煤漿測灰儀，設計了浮選計算機控制系統，它根據煤漿測灰儀旁線檢測的精煤灰分，運用模糊控制技術，通過調整浮選藥劑添加量和浮選機漿位，來實現浮選過程的反饋控制.工業性試驗表明，煤漿測灰儀的性能指標接近國外先進水平.煤泥浮選測控系統在淮北選煤廠的現場使用，使浮選生產在精煤灰分合格的前提下，得到了較高的產率，並降低了藥劑用量，從而保證選煤廠高效率地運行
  3. Abstract : the automation of coal flotation has been wandering for many years in china. the production efficiency is relatively low because of the feed forward control which adds the flotation reagent based on the fine coal in feed slurry, ignoring the quantity and quality of the products. aiming at this problem, method of measuring the flotation technical parameters was studied, the slurry level meter and the slurry ash - measuring device were worked out, and the computer control system of the coal flotation was designed. the feedback control was realized by using the fuzzy logic control control technology to regulate the reagent addition and the slurry level in the flotation tank according to the concentrate ash content detectedby the coal slurry ash - measuring device developed. the industrial experiment indicates that the performance inedxes of the coal slurry ashmeasuring device have come up to the advanced levek of the world. the application of the detection and control system in huaibei coal preparation plant results in a high concentrate recovery, a decrease of the reagent consumption, ensuring a highly efficient operation

    文摘:浮選自動化在我國多年來徘徊不前，一直採用根據入浮煤漿中的干煤泥量來確定加藥量的前饋控制方法，而不直接以產品的數質量指標作為控制目標，導致浮選生產效率較低.針對上述問題，研究了浮選工藝參數的檢測方法，開發了浮選漿位儀和煤漿測灰儀，設計了浮選計算機控制系統，它根據煤漿測灰儀旁線檢測的精煤灰分，運用模糊控制技術，通過調整浮選藥劑添加量和浮選機漿位，來實現浮選過程的反饋控制.工業性試驗表明，煤漿測灰儀的性能指標接近國外先進水平.煤泥浮選測控系統在淮北選煤廠的現場使用，使浮選生產在精煤灰分合格的前提下，得到了較高的產率，並降低了藥劑用量，從而保證選煤廠高效率地運行
  4. Compared with traditional feedforward, this paper presents an adaptive control method based on power detection minimization. with strong and fast digital signal processing ability, the adaptive system can control feedforward amplifier parameters exactly and suppress non - linear products at last by detecting changes of signals and environments

    與傳統前饋法相比，本文加入了基於最小功率檢測演算法的自適應控制電路，對輸入功率變化、溫漂和器件老化等導致系統性能下降的擾動進行自適應調整，使功放的非線性失真在很大程度上得到改善。
  5. In the study, the author went deep into the classroom, observed the phenomenon of in classroom, collected the materials, recorded the teachers " and students " behaviors completely, and analyzed the materials quantitatively and qualitatively. i tried to presented a full view of reward and punishment authentically to find out how students were influenced by teachers " reward and punishment

    本文作者深入教學一線，對課堂教學中的賞罰現象進行現場觀察、收集資料，對課堂上教師的賞罰行為以及學生的反饋行為進行全程記錄，同時以原始資料為基礎展開定量描述與定性分析，試圖以真實、客觀的方式呈現課堂賞罰的全貌，揭示賞罰對學生課堂行為的影響。
  6. At the same time, this paper summarized the experience on solving the problem of amplitude limitation of the controller output and proposed a method to predict system output by use of the model prediction with feedback correction. the on - line intelligence switch of controller output between the limited amplitude and imc controller output is determined according to the state whether the system output and the predictive output are within the given error range

    同時，本文在總結前人對輸入受限問題的處理經驗的前提下，提出用帶反饋校正的模型預測作系統輸出預測，根據系統響應和系統預測值是否在給定誤差范圍內來共同決定控制量在限幅值與內模控制器輸出值之間進行在線智能切換。
  7. Presents a simple method of compensating friction against the character of the nonlinear model of a brushless dc motor system which transfers the original system model to a simple linear model using the method of input - output linearization, and estimates the coulomb friction in the system in real - time using a nonlinear friction estimator, and then compensate the friction in the system using a friction feedforward, and concludes from simulation results that this method can effectively eliminate the influence of friction in brushless dc motor systems

    針對無刷直流電動機系統的非線性數學模型特點，提出了一種簡單的摩擦補償方法.該方法首先利用輸入輸出線性化方法將原系統模型轉化為一種簡單的線性模型，然後給出一種非線性摩擦估計器實時估計系統中的庫侖摩擦值，最後利用摩擦前饋補償方法對其進行補償.模擬結果表明該方法可以有效地抑制無刷直流電動機系統中的摩擦影響
  8. After introduction to the principle, the realizing methods and applications of chaos anti - control, the state of art of chaos anti - control methods both at home and abroad are aimed and summarized : including chaos anti - control based on lyapunov exponents allocation, chaos anti - control based on added linear or nonlinear state feedback, chaos anti - control based on the alteration of the dynamics of the available chaos attractors, chaos anti - control based on the time delayed system parameter perturbation or time delayed state feedback, chaos anti - control based on the precise tracking of the reference chaos system

    摘要在介紹混沌化控制的原理、方法、應用的基礎上，對如下混沌化控制方法的國內外現狀進行綜述：基於李雅普諾夫指數配置的混沌化控制、對受控系統施加線性或非線性狀態反饋輸入的混沌化控制、通過對已有混沌吸引子進行變異來實現混沌化控制、通過施加時滯參數攝動或時滯狀態反饋來實現混沌化控制、通過受控系統狀態對已知混沌參考系統狀態的精確跟蹤來實現混沌化控制。
  9. Abstract : a semi - analytical method is used to modelling the pract ical 3 - zone simulated moving bed chromatography ( smbc ) process for optimal searc hing. the switch time which is the most important operation parameter of 3 - zone smbc is analyzed based on the nonlinear batch chromatography theory firstly, and then adjusted by the deviation between the output and the expectation. the switch time approaches the optimization very soon by continously searching on the basi s of the theory. the parameters of the practical system are inputted into simulat ion, the result is used in our experiment and a good separation is obtained

    文摘:針對三帶模擬移動床色譜的實際模型，用一種融合了前饋與反饋的半解析優化計算方法對三帶模擬移動床色譜過程進行了模擬.首先，由非線性單柱色譜理論解析地給出一個三帶模擬移動床色譜的主要操作參數即切換時間值，然後利用所得結果與目標量之間的偏差來校正切換時間，在理論指導下進行優化搜索，切換時間能很快達到最佳值.將測得的系統參數引入計算，並將計算結果用於實際操作，得到了很好的分離效果
  10. This paper is first described backgroud and currence of gsm public phone, second is described technological requirement by ministry of information industry, third is detaiedly described the solution based on 32 - bit embedded system, subsequently is briefly described the embedded development platform - - sic33 on which the solution is based, then is detailedly described the hardward drivers, by which a test report is followed to prove the solution is viable, finally some conclusion is concluded

    本論文首先說明gsm無線公話產生的背景及現狀，第二章說明根據信息產業部和市場反饋制定的詳細需求，第三章說明確定的系統總體設計方案，第四章簡要說明構建該方案所用的sic33嵌入式系統平臺，第五章詳細說明作者負責設計的硬體驅動部分，第六章給出實際產品的測試報告，最後對本論文進行總結。
  11. According to the characters of three - dimension engineering, it designs data structure and data model by the method of oop. data structure of oop is applied to the modelling based on graphics. it realizes the display of three - dimension graphics in engineering. the system can import / export 3ds files. it realizes selection, feedback of 3d shape and the management of 3d shape ' s properties ; 3d shape frome 2d contour lines and the medial axis of a convex polygon and an arbitrary simple polygon are discussed

    針對三維工程的特點，採用面向對象的思想進行數據結構與數據模型的設計；將面向對象數據結構應用於基於圖形的建模技術中，實現了工程中三維圖形的顯示，並通過與3ds文件的介面，導入造型復雜的模型進行補充；基於二維設備的三維交互問題，實現了對三維形體的選擇、反饋以及三維形體的屬性數據的管理；對由二維輪廓線構造三維形體，本文創造性的提出了利用多邊形的中軸來構造三維形體，並修正了求多邊形中軸的演算法。
  12. It is based on the mean square error ( mse ) principle and we prove the validity of the method by computer simulations. to make a thorough understanding of mimo adaptive equalization system, in this thesis the author : 1 ) ananlyze the characteristics of mimo wideband channels and the modeling and simulation of 3gpp scm ; 2 ) research the capability of mimo linear adaptive equalization and mimo non - linear adaptive equalization by computer simulations ; 3 ) present a new method for selecting the order of adfe model 4 ) implement the adfe on adsp - 21160 for static image transmission, and already achieve satisfactory experimental result, which make a foundation for mimo adaptive equalization to be appllied in the real communication systems

    為對mimo自適應均衡系統性能和設計做更深入的理解和研究，本文主要: 1 ）研究了寬帶選擇衰落通道特性及3gppscm通道建模模擬; 2 ） mimo線性自適應均衡器和mimo非線性自適應均衡器系統的性能分析和模擬實現; 3 ） mimo系統下的判決反饋均衡器的階數選擇模擬試驗分析; 4 ）把mimo自適應判決反饋均衡運用到了硬體模擬平臺上，採用了基於adsp - 21160的硬體dsp開發板，對靜止圖片的傳輸進行了試驗、分析和比較，得到了較滿意的實驗結果，使mimo自適應均衡在實際通信系統上的應用及實現奠定了現實基礎。
  13. After deeply studying all kinds of problems of current actualization methods, we put forward to a new actualization method of the technology of physical isolation on the base of cpld. we make a lot of research on data encryption and describe the design method of the encryption chip on the base of lfsr ( linear feedback shift register ). after putting forward to the whole design procedure, we design an encryption chip on the base of lfsr, which can provide the high - quantity data stream of encrtption

    在深入研究了常見物理隔離技術實現方案中存在的各種問題后，提出了一種基於cpld的全新實現方案；同時，對于存儲信息的加密也進行了研究，詳細闡述了基於移位寄存器的非線性組合序列密碼的設計方法，提出了完整的設計流程，並設計了一個基於fpga的非線性組合反饋序列密碼晶元，該晶元能提供高質量的偽隨機密鑰流。
  14. Later on, after elaborating the disadvantages of the old methods in detecting and recognizing moving objects, a series of corresponding approaches are proposed, such as grid scan, local tracking bug and dynamic window in object tracing to reduce the huge data needed to be processed, maximum and minimum for selecting a proper segmentation threshold and improved conversion from rgb model to hsv and so on to decrease the influence of inhomogeneous lighting and the color noise, a bilinear interpolation in each quadrant to eliminate the bad effect on the recognition precise because of the distortions of the camera. after that, much emphasis is given on application study in pattern recognition with a feed - forward neural network. both the basic bp algorithm and improved bp algorithm in the study process are described in detail, and the later is used to quicken convergence speed and improve validity of the network

    然後，分析和闡明了傳統的運動目標檢測方法的不足，並在此基礎上結合研究中的實際實驗環境，提出了一系列解決方法，包括針對降低龐大數據量而提出的網格掃描、局部「跟蟲」追蹤和動態窗口掃描等目標檢測方法，針對實驗環境中光照不均和顏色干擾提出基於人機交互的最大最小值閾值選取方法和引入改進的rgb模型到hsv模型的轉換方法，為消除圖像畸變對識別精度的惡劣影響而採用的通過控制點進行雙線性插值進行畸變校正的方法；緊接著，概述了神經網路的發展歷史和幾種常用神經網路模型的特點，重點研究了前饋型神經網路在模式識別中的應用問題，詳細闡述了基本的bp演算法和學習過程中bp演算法的改進，從而使網路收斂速度更快，解決問題更有效，並在此基礎上，設計了一個基於bp神經網路的運動目標識別系統，給出了實驗結果。
  15. On the basis of saltzman ' s model, we add in aerosol parameter, and modify the cloud feedback mechanism, then set up a sea - ice, ocean temperature nonlinear coupled climatic model which involving aerosol, co2 and cloud parameters

    在saltzman模式的基礎上引入了氣溶膠參數化方案，並對原模式中的雲反饋機制進行了修正，從而建立了一個含氣溶膠、 co _ 2和雲參數的海冰?海溫非線性耦合氣候模式，提高了模式階次。
  16. A non - linear feed - forward loop is used to realize the coordinated control between the two controlled variables at the two control ends at first. secondly, a constant ac voltage control is implemented for a short period after the ac fault removal. finally, a staggered recovery strategy for different hvdc subsystems is also adopted, with the restart time interval of them optimized using the steepest descent gradient search method

    該協調恢復策略的三個特點是：在常規的控制器結構中加入一個基於準穩態工作點的非線性前饋迴路；在交流故障被切除后的一個短暫時間內，逆變側採用定交流電壓控制：對不同的直流輸電子系統採取一種漸進的恢復策略。
  17. And in addition, the paper explores the aspects of internal fluctuation, which is viewed as the random choices of the cognitive subject, how it is depend on the initial conditions and is enlarged by the method of positive feedback with step by step on the views of the nature, material outlook and thought modes. what ' s more, under the controls of the nonlinear interactions, the paper respectively explores the development principle in the culture of technology and science between the west and the east on the aspect of attractors and the order parameters, which result from the cooperation and competition. finally, the paper correctly formulates the different value preference in accord with the attractors and the order parameters, and focuses respectively on the traditions of the eastern pragmatic preference and the western contemplative preference and technological preference

    在此基礎上，從東西方科技文化的發生和起源入手，從耗散結構的觀點出發，考察了認知主體的隨機性選擇這種文化的內漲落因素，是怎樣依託于各自不同的初始條件?地理氣候條件，在自然觀、物質觀和思想模式方面一步步得到正反饋式的放大;進而，在文化系統內部種種非線性的相互作用下，從競爭和協同所必然產生的序參量和吸引子兩個方面，分別考察了東西方科技文化不同的發展規律，聚焦東方的實用化取向和西方的思辨化、技術化取向的影響機制，從它們在不同時期所發揮的不同作用正面回答了「李約瑟難題」 。
  18. Based on the reference [ 22 ], the dynamical modeling converters for hvdc system have been transformed to a nonlinear system represented by input - output model with unmodeled dynamics and bounded disturbances, and a robust adaptive output - feedback nonlinear controller is designed. the controller counteracts the uncertain dynamic nonlinearities and bounded disturbances by nonlinear damping terms, and unmodeled dynamics by a dynamic signal

    本文在文獻[ 22 ]的基礎上，對高壓直流輸電系統換流站動態模型進行變換處理，將其化為一類具有含未建模動態和有界擾動的輸入-輸出非線性系統，並設計了一種魯棒自適應輸出反饋控制器，利用非線性阻尼項來抑制系統的動態不確定性和有界擾動，引入一動態信號來抑制系統的未建模動態。
  19. This paper makes a deep research in the software and hardware realization of fault location system with radial feeders, stressing on the design of the hardware system and software programming scheme

    本文對基於「遞進信息法」的配電網饋線故障定位系統的硬、軟體實現進行了較深入的研究，重點設計了硬體系統和軟體編程方案。
  20. Because the feeder short circuit current of subway is very great, the plug - in boards of input and output are different from the ac feeder protection. after analyzing and comparing the two popular input components, the thesis choices the shunt. in addition, the thesis gives the original design of output plug - in board

    由於地鐵饋線短路電流較大，保護的輸入元件及出口插件與交流保護不同，本文對目前常用的兩種輸入元件進行了分析比較后，選擇了分流器，在分析了直流快速開關動作情況的基礎上，對出口插件進行了初步設計。
分享友人
分享到 Line

分享到臉書