cooling water ratio 中文意思是什麼

cooling water ratio 解釋
冷卻水倍率
  • cooling : n. ,adj. 冷卻（的）。
  • water : n 1 水；雨水；露；〈常作 pl 〉 礦泉，溫泉；藥水。2 〈常 pl 〉水體；水域；水道；海；湖；河；海域；...
  • ratio : n. （pl. ratios）1. 比，比率，比值；比例；系數。2. 【經濟學】復本位制中金銀的法定比價。vt. 1. 用比例方式表達；求出…的比值；使…成比例。2. 將（相片）按比例放大或縮小。
  1. The dissertation shows how a series of well - performing composite adsorbents that prepared by author suitable for the features of adsorption refrigeration are gained by using water and ethanol as cryogen ( adsorbate ), which cause no harm to body and environment. the performance of the working pairs of water or ethanol with the composite adsorbents in the refrigeration through adsorption and desiccant cooling are thoroughly examined by experiments. the dissertation also examines, through energy analysis, the refrigeration efficiency and utilization ratio of the adsorption refrigeration, and analyzes the economic potential of the adsorption air - conditioning

    以對人體無傷害、對環境無污染的水和乙醇作為吸附製冷工質，研製出適合於吸附製冷特點的性能優良的一系列復合吸附劑；對水或乙醇與自製復合吸附劑組成的製冷工質對的吸附式製冷和吸附除濕製冷的性能進行了深入的實驗研究；用有效能分析方法討論了吸附製冷循環的製冷效率和能量的利用率；對吸附式空調的經濟性進行了分析。
  2. Abstract : this thesis discusses the process and operational management of the 600 mw condenser cooling water systems at high concentration ratio in respect of chemicals selection and dosage

    文摘:主要從循環水處理藥劑的篩選及其加藥量，來討論目前600mw機組高濃縮倍率下循環水處理的途徑及運行管理。
  3. The results indicated that the dimension, shape and purity of base material could meet the functional demand of solid lubricant ; the thermal decomposition temperature of ptfe resin exceeds 400 c, but organic and inorganic packing filler added in ptfe made the water absorption rate of composite material increased, melting temperature and decomposition temperature decreased, in the meanwhile oxidative decomposition reaction was accompanied ; polar groups such as c = o, c - o - c and so on in the carbon fiber surface is advantageous to increase compatibility with other components and interlayer shearing strength ; uniform design experimental method could help to find the relationship between formula and frictional property by relatively small tests. the developing trend of each formula ' s friction coefficient could be showed by fitting curve ; the friction coefficient with no copper powder or graphite in formula was relatively big. this fact showed that copper powder and graphite should be used cooperatively ; it was found that when the ratio of copper powder to graphite by weight is 15 : 60, 30 : 30 - 40 and 60 : 15 - 30 respectively, the friction coefficient was relatively small. the degree of crystallinity of pure ptfe reached maximum by air cooling and the abrasion loss also reached maximum among three ones ; at the same time, the abrasion loss of solid lubricant sample was also the biggest among three ones ; when solid lubricant matched with 45 # steel axle or gcrl5 steel axle, lubricant transfer film could be formed on metal surface, thus direct contact between the surface of metal friction pair rings was reduced. their working life was elongated extremely ; there was mainly much graphite, a little ptff, moo3, feso4, cus and so on in lubricant transfer film

    試驗結果表明：所選原料的尺寸、形狀及純度可滿足固體潤滑劑的性能要求；聚四氟乙烯樹脂熱分解溫度超過400 ，但在ptfe中加入無機填料會使復合材料吸水率提高，熔融溫度及分解溫度降低，且伴有氧化分解反應；碳纖維表面含有c = o及c - o - c等極性基團，有利於提高其與其它組分的相容性，提高層間剪切強度；均勻設計試驗方法能夠用較少的試驗次數找出配方與摩擦性能間的關系，擬合曲線基本能表示各配方的摩擦系數發展趨勢；配方中不加銅粉或不加石墨，其摩擦系數均較高，說明銅粉和石墨應該配合使用；當銅粉15份、石墨60份時，銅粉30份、石墨30 - 40份時，銅粉60 、石墨15 - 30份時，摩擦系數均具有較低值；純聚四氟乙烯樹脂在空氣冷卻時結晶度最大，磨損量也是三者中最大的；同時，固體潤滑劑試樣在空氣冷卻時的磨損量也是三者中最大的：不論是固體潤滑劑與45 #鋼軸配副或是固體潤滑劑鑲嵌入銅套后與gcr15鋼軸配副，在金屬表面均可形成潤滑轉移膜，從而減少金屬摩擦副表面間的直接接觸，大大延長其使用壽命;轉移膜中主要含有較多的石墨、少量聚四氟乙烯、 moo 。
  4. Discuses doas ' demand to fresh air humidity ratio and model by rotary wheel removing moisture load, and analyses its scheme and energy consumption of dons by rotary wheel removing moisture load based on solar energy regeneration, and result shows a 30 % energy saving comparing to cooling dehumidification, and it can supply cooling capacity freely when using directly underground water or cooling tower supplying cooling capacity during transition season periods

    討論了獨立新風系統對新風送風含濕量的要求和除濕轉輪承擔系統濕負荷的方案，分析了基於太陽能再生的轉輪除濕獨立新風系統空氣處理過程及能耗，結果顯示與直接冷卻除濕的獨立新風系統相比節能30 % ，在直接利用地下水供冷或在過渡季節使用冷卻塔供冷的情況下則可以達到免費供冷的目的。
  5. Evaporative cooling has been regarded as a new cooling technology on hydro - generator, and it not only could increase the ratio of material utilization and reduce the difficulties of making large - scale hydro - generators, the running difference in temperature, the stress of the generator ' s stator and the possibilities of the incidental occurrences, but also has better performance than internal water cooling

    蒸發冷卻作為水輪發電機的一種新型冷卻技術，不僅可以提高材料利用率，減小特大型發電機製造難度，降低發電機定子繞組運行溫差和發電機定子的應力，減少事故隱患，更重要的是蒸發冷卻比水內冷具有更好的優越性。
  6. When the underground water is used, its energy - efficiency ratio can reach higher than 5, which will save 40 70 operational cost compared with a common wind cooling combination

    採用地下水時，能效比達到5以上，比普通風冷機組節省運行費用40 70 。
  7. Temperature process lines with tidal cycles of multi engineering conditions of characteristic sections are obtained, the relationship between temperature distribution and velocity field is established, the inner mechanism change of temperature process lines is investigated, the interrelation between water intake and outlet is analyzed, the relation between the ratio of dimensionless temperature rise span of the plant intake and the ratio of river discharge volume and plant cooling water intake volume is obtained

    得到了特徵斷面多種工況隨潮周期變化的溫度過程線，建立了溫度場與流速場的相關關系，研究了溫度過程線的變化機理，分析了取排水口對溫度場的相互影響關系，探討了無量綱溫升時長比與無量綱來取流量比的相關關系。
  8. Wind - cooling modular cold / heat water combination series are widely used in office building, villa, factory, hospital, and entertainment site etc, and its market occupation ratio is always high enough because of the following advantages : modular combinations supply cool in summer and heat in winter without boiler ; main equipment is installed in the top of the building that will save the investment for cooling room and avoid the maintaining for cooling water and the worrying about " corps bacteria " ; high cop value and automation degree

    風冷模塊冷熱水機組廣泛適用於辦公樓、別墅、廠房、醫院賓館以及娛樂場所等各行各業被特工們工程中，而且市場佔有率一直居高不下，皆因其有諸多優點：模塊機組夏季供冷、冬季供熱，不需另設鍋爐房；主機安裝在房頂，可省去冷凍機房的投資，避免冷卻水的保養及「軍團菌」的擔憂； cop值較高，自動化程度高。
  9. Owing to using water as cooling or heating media, the combination can reach high energy - efficiency ratio to save the operation cost ; while both cooling and heating are needed, it is possible to realize the energy balance of the inner system, reduce the operational time of cooling tower and heating equipment to complete the energy - saving goal

    由於採用水作為冷卻和加熱介質，故機組的能效比比較高，節省運行費用；在需要同時供冷和供熱時，可實現系統內部能量平衡，減少冷卻塔和加熱設備的運行時間，以達到節能的目的。
  10. The engine applies water - cooling system, so the working circumstance is improved the combustion ratio, power and torque. the fuel consumption and the exhausting gas are reduced at the same time

    採用水冷技術，改善了熱機部分的工作環境，提高燃燒效率，增大了功率和扭矩，同時油耗和排放降低。
  11. In this paper, the processing condition of freeze - drying snack dumpling was studied, and the parameters of cooling rate, material volume, vacuum, and temperature were determined based on drying time and recovery ratio of water absorption

    摘要通過試驗對速食水餃冷凍乾燥工藝條件進行了初步研究，並以乾燥時間和復水比為指標確定了冷凍乾燥工藝中的預凍速率、單位面積裝料量、乾燥室真空度、加熱板溫度等工藝參數。
分享友人
分享到 Line

分享到臉書