measured direction 中文意思是什麼
measured direction
解釋
實測方位-
Direction on the sphere is measured by azimuths.
地球上的方向是通過方位角測定的。 -
Trend is the direction of the horizontal projection of a line, measured clockwise from north.
線傾向：它是直線水平投影的方向，自正北順時針度量。 -
Secondly, output powers are measured in the different wind velocity or the direction angle or angle speed for mechanics model. the optimal angle of the direction is determined. that is to say, output power is the maximum in this direction angle
其次，通過對風力發電機模型在不同風速、不同方向角、不同角速度的情況下輸出功率的測量，得出最佳方向角，即在該方向角處輸出功率最大。 -
By means of bending tests of three - point and four - point, complex fracture experiments were made for cast iron material with crack. the stress intensity factor and breaking direction angle of cast iron material were measured and compared with theoretical values. based on the research some useful conclusions are given for engineering design and application
通過3點彎曲和4點彎曲實驗方法，對含有裂紋的鑄鐵材料進行復合型斷裂實驗研究，測試鑄鐵材料的應力強度因子、斷裂方向角，將實驗結果與理論值進行分析、比較，找出兩者之間的異同點，得到一些對工程設計及應用具有實際意義的結論。 -
The setting up on gun position uses double row showing, and up row is the direction of fire and angle of fire that terminal set has provided, down row is the angle that coder on the undercarriage has measured when gun layer attached to the trunnions while operating, when double row data consistent, stop operation and finish supervise and control
在炮位上的設置採用雙排顯示，上排即為終端機提供的射角和射向，下排則為瞄準手操作過程中固定於耳軸、下架基軸部位的編碼器所測得的獲得角。當兩排數據一致時停止操作，完成監控。 -
Originating airport name, metar speci issue time, wind direction speed gust, wind direction variation, visibility, runway visual range, weather during time of observation, cloud, air temperature dew - point, qnh pressure measured at airport with adjustment made to suit aeronautical use, weather during the past hour but not at time of observation, wind shear information, trend - type landing forecast
發出資料的機場名稱發出metar speci的時間風向風速陣風風向轉變能見度跑道視程觀測時的天氣雲層氣溫露點qnh在機場錄得的氣壓，經調整以配合航空用途過去一小時但非觀測時的天氣風切變資料飛機降落用的趨勢預測。 -
Originating airport name, metarspeci issue time, wind directionspeedgust, wind direction variation, visibility, runway visual range, weather during time of observation, cloud, air temperaturedew - point, qnh ( pressure measured at airport with adjustment made to suit aeronautical use ), weather during the past hour but not at time of observation, wind shear information, trend - type landing forecast
Metarspeci電碼包含趨勢預測，即預測未來兩小時內天氣的轉變，而且更利用特別標號（視乎情況，標號可以是ttttt = becmg或tempo ）又或是nosig ，來指明轉變。 （ becmg意指逐漸轉變； tempo意指間中； nosig意指並無顯著轉變。 ） -
The basic properties of wood such as moisture content, density, grain direction and modulus of elasticity can be measured nondestructively
摘要與木材材質有關之因數如含水率、比重、木理走向、彈性系數等可藉破壞或非破壞方法來測定或推定。 -
Meanwhile, growth stress of aforementioned species in standing and fallen trees at different heights, different direction ( east, south, west and north ) have been measured, as well as the moisture content of green wood
同時，在活立木狀態下或伐倒后在不同高度，不同方向（東、南、西、北）測量了以上幾種桉樹木材的生長應力，生材含水率等。 -
Frictional coefficient of paper / al / pe film was measured on different surface and different direction, and the data was analyzed and compared with these different ingredients, thus the frictional coefficient of this new material could be better understood
摘要通過對紙鋁塑復合薄膜正反兩摩擦基材面相互摩擦及不同角度摩擦的動、靜摩擦系數值的測定，比較並分析了不同摩擦基材面和不同摩擦方向對其大小的影響，從而對這種新材料的摩擦系數有了進一步的認識。 -
When pure shear wave propagate in anisotropy media, even thought propagation direction is parallel to the direction of aligned cracks, experimental results exhibit that only two kinds of shear - wave velocity can be measured - fast shear wave and slow shear wave neglecting polarization direction
這個實驗結果進一步表明，純橫波在各向異性介質傳播時，即橫波的傳播方向與裂隙平行，無論橫波的偏振怎樣改變，只能觀測到兩種橫波速度，快橫波和慢橫波。 -
In the analysis of the frequent spectrum and the reflection coefficients, based on goda ' s two - points method which fit to the normal incident wave, a modified two - points method is derived that can be used to calculate the frequent spectrum and reflection coefficient of the oblique waves from which the frequent spectra of incident waves and reflected waves incoming in arbitrary angular, the bulk reflection coefficient and the frequent spectrum of reflection coefficient could be computed, also from which in theory the waves could be measured in two wave gauges which is disposed at any direction
為了分析單向不規則波入射波的頻率譜和反射系數，本文在goda用於分析正向不規則波的兩點法的基礎上，提出了可用於斜向不規則波頻譜分離及其反射系數計算的改進兩點法，該方法可用於計算任意波浪入射角的入、反射波譜、總體反射系數和反射系數的頻率譜，並且測量波浪過程的兩浪高儀可在較廣的方向范圍內布置。 -
By using the standard deviation method, the scaling properties described by the local fractal dimension d and crossover length tc of 48 measured landform profiles in different direction of 6 different studied landform sections are calculated
負反饋機製表現的越明顯；對于以構造沉降作用為主的盆地區而言，各個方向的地形剖線的分維值均顯示出小於1 . 5的正反饋機制。 -
( 3 ) based on the analyses results of simple inference method and seismic focal mechanism and on the statistic results of measured geostress data, the direction of principal stress was derived and based on the analyses results of macro geological estimate and on the statistic results of measured geostress data the magnitude of principal stress was derived too. the influence of rapidly down - cutting of yellow river on geostress field of studied zone was discussed. then the evolution of geostress field accompanying with the down cutting of yellow river and was simulated with fem and the spatial distribution features of geostress were discussed
根據簡易推斷法、地震震源機制分析法以及地應力實測資料統計分析結果，綜合確定了工程區的主壓應力方向；運用地質宏觀判斷法並結合地應力實測資料的統計分析結果對地應力的量級進行了綜合評價，並進一步討論了黃河快速下切對研究區地應力場的影響；運用有限元法模擬了研究區地應力場的形成過程，並探討了地應力的空間分佈規律。 -
Based on in - depth analysis on characteristic and function principles of psd, combined with characteristic of measured object, this article presents an new real - time measurement for symmetrical degree, guiding - groove, twining angle, inside radius of long direction pipe ; completes designing work for hardware of function module and application software ; and gives analysis and computation on error sources and uncertain - degree of measure result. based on above work, this article develops a parameter - auto - chosen, integrated and automatic measurement device for beeline degree, guiding - groove symmetrical degree, twining angle and inside radius of long direction pipe
本文在深入分析研究psd的特點和工作原理的基礎上，結合被測量對象的特點，首次提出了長定向管導槽對稱度、纏角、內徑等實時自動化測量的一種新方法；完成了硬體功能模塊及應用軟體的設計工作；並對測量結果的誤差源及不確定度進行了分析和計算；在此基礎上研製了長定向管的直線度、導槽對稱度、纏角及內徑等參數自動、實時綜合測量設備。 -
The technique core of the 3 - d outline tracking scan lies in the adoption of several photoelectric sensors, laser measuring sensors and super voice wave measuring sensors to carry on probing, the single chip makes the photoelectric signal examined as the control basis, and controls the step motor to drive measurement machines and probing sensors to make outline tracking and scans movement along high and breadth direction of the vehicle, and record its outline track, and the data measured is delivered to the computer, finally, acquires the size of the vehicle checked through the place of computer data processing
三維輪廓跟蹤掃描技術的核心在於採用多套光電傳感器、激光測距傳感器、超聲波測距傳感器進行探測，單片機把檢測到的光電信號作為控制依據，控制步進電機驅動測量機及探測傳感器在車長、車高和車寬方向上作輪廓跟蹤掃描進給運動，記錄其輪廓軌跡，並把測得的數據傳送到上位機，經上位機數據處理獲得被檢車輛的特徵尺寸。 -
The phase structure of different cu - fe thin films were studied by using grazing incidence x - ray analysis ( gixa ). the texture and residual stress of different cu - fe thin films were measured by scan of x - ray diffraction ( xrd ) and 2 scan with different. the thicknesses of different thin films were characterized by means of small angle x - ray scattering ( saxs ) technique. by using atomic force microscope ( afm ) measured surface roughness of thin films. the component of different thin film was characterized by energy disperse spectrum ( eds ) and x - ray fluorescence ( xrf ). the magnetic properties of cu - fe thin films were measured by means of vibrating sample magnetometer ( vsm ). in addition, the giant magnetoresistance ( gmr ) effects of different films were also measured. the original resistance of the film fabricated by a direction - current magnetron sputtering system is directly affected by bias voltage
利用掠入射x射線分析（ gixa ）技術對不同cu - fe薄膜的相結構進行了研究;利用xrd掃描及不同角度的2掃描對薄膜進行了結晶織構及殘余應力分析;運用小角x射線散射（ saxs ）技術測量了薄膜的厚度;採用原子力顯微鏡（ afm ）觀察了薄膜的表面形貌;運用能量損失譜（ eds ）及x射線熒光光譜（ xrf ）對薄膜進行了成分標定;使用振動樣品磁強計測量了不同cu - fe過飽和固溶體薄膜的磁性能;最後利用自製的磁阻性能測試設備測量了真空磁場熱處理前後不同薄膜的巨磁阻值。 -
Finally, compared with the 2d result, the synthetic jet that 3d numerical simulated has a definite direction. the 3d result, however, has a much smaller fluctuation owing to the span - wise instability which created a breakup of coherent vertical structure into smaller scales, it therefore compares more favorably with the measured data in tests
三、三維模擬結果顯示合成射流的方向性極佳，與二維模擬相比較，三維數值模擬的速度波動較二維模擬要小，旋渦的相干結構衰弱，這是因為三維模擬考慮了流動的橫向不穩定性，這更加接近實際情況。 -
Abstract : wind tunnel experiments were carried out to investigate the influence of wind direction on the wind pressure of proximite buildings. mean and fluctuating pressure coefficients on a high building, at sixteen different wind incidences and with one and two interfering buildings, were measured in the tests. this paper presents the characteristics of wind pressure on the building, which varies with the incident wind angle and with the numbers of adjacent buildins. due to the variation of wind angle and the interference effects, the complex feature of pressure distributions can be found on the downstream building surfaces for building group arrangement at certain angle of wind attack. some area of the interfered building for such configuration, in comparison with one single building ' s, may undergo very strong positive or negative pressures
文摘:通過風洞實驗研究了風向對兩個和三個鄰近建築風壓分佈的影響特性.實驗結果給出了在不同風向角下，作用於受擾建築上的平均和脈動風壓系數.當受擾建築處于下游位置時，建築之間的干擾效應主要表現為遮擋影響，建築物上的總體風壓系數不是很大，但在建築物表面上有時會產生局部較大的負壓系數.另外，在某些風向角下由於受到上游分離氣流的影響，在下游建築的局部表面又會出現較大正壓.這些結果可供建築布置和結構設計時參考 -
An experimental investigation on the transition in the boundary layer of horizontal plane with and without single two - dimensional roughness elements has been carried out in the wind tunnel. the distribution in normal and stream - wise directions of intensity of t - s wave excited by vibrating beam was measured in every condition. neutral curves were obtained by measuring the growth of the t - s wave at the normal critical location along the stream - wise direction
在風洞中對水平光滑平板以及加有粗糙元平板的邊界層轉捩進行了測量與研究，比較了不同情況下平板邊界層內由振動梁激勵生成的t - s波沿流向和法向強度的分佈規律，得到了相應的振型增長曲線以及中性曲線。
分享友人