汽缸組 的英文怎麼說

中文拼音 [qìgāngzǔ]
汽缸組 英文
bank of cylinders
  • 汽 : 名詞1. （由液體或某些固體變成的氣體） vapour2. （水蒸氣） steam
  • 缸 : 名詞1. （盛東西的器物） jar; jug; vat; crock 2. （缸瓦） earthenware with crude glaze 3. （像缸的器物） jar-like things
  • 組 : Ⅰ名詞1 （由不多的人員組成的單位） group 2 （姓氏） a surname Ⅱ動詞（組織） organize; form Ⅲ量詞（...
  • 汽缸 : [機械工程] cylinder stator汽缸套 cylinder liner; 汽缸組 cylinder block
  1. Then following reality constituent of engine and connecting component interface, a nonlinear signal cylinder engine model has been created, though fire interval and fire order, a control - oriented four cylinders engine is build. following dynamometer is seen as load, performance of engine is simulated and researched under the condition of constant torque and speed, validation of the math and simulation model have been confirmed by comparison result between simulation with test result of engine performance simulation software dyno

    按照發動機的實際組成，根據各部件的介面類型連接模型庫中的部件，建立了單缸發動機非線性模型，在此基礎上，依據發動機實際發火間隔和順序，建立了面向控制的四缸汽油機模型，並以測功器為負載，通過恆轉矩和恆轉速方式進行了發動機性能模擬和研究，模擬結果和發動機動力性能模擬軟體dyno測試結果的對比驗證了數學模型和模擬模型的正確性。
  2. According to the question of using natural cooling will prolong the period of opening cylinder for overhaul, we expound three modes for the steam turbine quickly cooled after being stopped, these are vacuum and aeration - cooling, pressure - air cooling and steam 1ing, then analysis and contrast them

    摘要針對汽輪機採用自然冷卻方式會延長機組檢修開缸時間的問題，提出了汽輪機停機后的三種快速冷卻方式：抽真空通汽冷卻法、壓縮空氣強迫冷卻法和蒸汽冷卻法，並對這三種方式進行了比較和分析。
  3. After researching the part thermal equipments and systems include heaters, steam leakage and receiving systems, low pressure drain system etc, and computing the efficiency of the systems, find out the better choice of the imported assemblies than the domestic assemblies in parameter and the disfigurements in design and making. based on the above, point out the measure to progress them. according to the analysis, we can get some measures to increase the economical level of the systems and save more energy

    對局部熱力設備及熱力系統進行分析研究，包括:加熱器設備、漏汽及回收系統、低加疏水系統、主、再熱蒸汽系統以及凝汽器等部位；並計算汽輪機本體高、中、低壓缸效率，藉此著重對汽輪機通流部分進行了剖析，找出國外進口機組動、靜葉柵、葉型的選擇比國產機組先進性以及國產機組在通流部分設計和製造中的諸多缺陷，並且指出了改進的方向，為機組提高熱經濟性、節能降耗奠定了理論基礎。
  4. Based on these, the 200mw turbine unit of panxian thermal power plant is selected, and the key problems are analyzed, such as, selection of cool medium, flow path of medium, thermal stress during fast cooling etc. the cfd software is adopted, and the maximal thermal stress, the optimum cooling model and system, and the autocontrol scheme during fast cooling, are gotten. in the end, the results are applied in the site. the optimum cooling model and system, and the autocontrol scheme would be provided reference as the other similar units

    於此，本文以盤縣發電廠200mw汽輪機為研究對象，對發電廠汽輪機組空氣冷卻裝置及系統現狀深入分析基礎上，應用cfd軟體數值模擬了不同工況時汽輪機缸壁溫度變化情況，對200mw汽輪機快冷過程中控制指標進行分析，優化機組的快速冷卻過程，合理快冷設備、系統，優化控制曲線，分析最大熱應力值及最佳冷卻方式選擇，同時，對現有盤縣發電廠汽輪機組快速冷卻系統進行優化改進，並進行了實驗與實施。
  5. This paper studied two - dimension model of rotor and cylinder and builded the finite element model. generally take the rotor and the cylinder as control objects ， definite their boundary conditions ， solute their temperature fields ， and then analyst their bear expansions and distortions as well as thermal stress distribute ， to control the courses ， and keep the unit the most optimum operating condition. and put the theories into practice developed by c + + program, used as the important part of the online monitoring and management system of life of the steam turbine

    本文對汽輪機轉子和汽缸的二維模型的進行分析，建立有限元模型；將汽輪機轉子和汽缸作為控制對象，確定其邊界條件，求解其溫度場，分析其熱膨脹、熱變形以及熱應力分佈；採用c + +語言編制汽輪機高壓缸、中壓缸以及缸體的溫度場實時在線監測程序，作為汽輪機壽命在線監測與管理系統的核心部分，用以指導汽輪機的啟停及運行過程，使機組可以安全的、經濟的運行。
  6. The flow passage of intermediate - pressure cylinder, as well as the condenser and the vacuum extraction system had also been retrofitted in 2004, the safety and economic behavior of said unit being further enhanced

    2004年又對7號機中壓缸通流部分及凝汽器、真空抽氣系統進行了改造，機組的安全性及經濟性均有了進一步提高。
  7. It is composed of magnetic pulse sensor and control components, and is a built - in part inside distributor. it detects engine cranking position signal and cylinder signal via sensor, followed by treatment by control unit, thus controlling the on off of the current of control ignition coil to achieve the purpose of ignition. it has a function of auto closing regulation

    該型產品是為微車無觸點點火系統而研發的，它由磁脈沖傳感器和控制組件構成，內置於分電器內，通過傳感器檢測發動機曲軸位置信號汽缸信號，然後經控制組件處理，控制點火線圈中電流的通斷，從而達到點火目的，具有閉合角自動調整等功能。
  8. It is composed of magnetic pulse sensor and control components, and is a built - in part inside distributor. it detects engine cranking position signal and cylinder signal via sensor, followed by treatment by control unit, thus controlling the onoff of the current of control ignition coil to achieve the purpose of ignition. it has a function of auto closing regulation

    該型產品是為微車無觸點點火系統而研發的，它由磁脈沖傳感器和控制組件構成，內置於分電器內，通過傳感器檢測發動機曲軸位置信號、汽缸信號，然後經控制組件處理，控制點火線圈中電流的通斷，從而達到點火目的，具有閉合角自動調整等功能。
  9. The first new - type turbine unit ( k156 ) was designed and manufactured by the shanghai turbine ltd, which was ordered by the ningxia zhongning power ltd. company, and the unit is adopted longer motion blade with 1050mm to the last stage for 330mw turbine in china

    上海汽輪機有限公司第一次為寧夏中寧發電有限公司設計製造的新型改進優化型機組（ k156 ） ，該機型是目前國內330mw機組上在低壓缸末級第一個採用1050 ?長葉片，並且被寧夏中寧發電有限公司采購。
  10. Turbine is of reactionary single shaft three cylinders with double exhausts subcritical pa - rameter and intermediate reheat, which is the product of abb switzerland. the generator is of static excitation and hydrogen inner cooling type of hydro - gen cooling core with water cooling stator

    汽輪發電機組為瑞士abb公司產品，亞臨界中間再熱三缸雙排汽單軸冷凝反動式汽輪機發電機採用靜態勵磁水氫氫冷卻方式。
  11. The method of surfacing welding sealing strip was adopted to repair the deformation of the flange joint surface of the high and intermediate pressure outer casing

    摘要湛江發電廠在1999年1 （上標# ）機組大修中採用堆焊密封帶方法修理了汽輪機高中壓外缸中分面的變形缺陷。
  12. The finishing of the high - and - medium pressure outer casing for the 300mw steam turbine unit

    汽輪機組高中壓外缸的精整
  13. Therefore, this thesis studied the creep properties of 2cr11nimovnbnb steel which is one of bolt material used in 300mw stream turbine

    為此，本論文對國產300mw機組用於汽缸螺栓的2cr11nimovnbnb進行了高溫蠕變試驗研究。
分享友人
分享到 Line

分享到臉書