臂式基 的英文怎麼說
中文拼音 [bèishìjī]
臂式基
英文
cantilever footing-
The mechanism of different strengthened story rigid cantilever styles is analyzed in this paper. several strengthened story models in common use are compared. the reasonable number and stiffness strengthened stories optimal position in high - rise frame - core tube structure are gained, and the dynamic response of structure with stiffness strengthened stories is analyzed
本文通過分析不同形式的加強層剛臂的作用機理，並在對常用的幾種加強層模型進行分析比較的基礎上，提出了高層框架-核心筒結構剛性加強層的合理布置數量及其布置最佳層位的選擇。Effect of foundation trench strength to endogen force and failure model of cantilever retaining wall
基槽強度對懸臂式擋土墻內力和破壞模式的影響Ultrasonic has being attracted much attention gradually in fuel atomization because of some specialities of cavitation and infection on liquid flow. in the course of atomization of pitchy oil, especially, does it show greatly its advantage, but its material atomizational mechanism need research ulteriorly. the primary content of this thesis is about adding cantilever reed to effervescent atomizer so as to combine ultrasonic and effervescent. this thesis has discussed ultrasonic some mechanism, ultrasonic dynamical procreator, effervescent and liquid mucosity infection on atomization, at the some time we make some experiments and discuss atomization rule following some machinery parameter and run parameter so as to find some rule about ultrasonic atomization and to rich the research of ultrasonic atomization mechanism. all that will be beneficial to the design about ultrasonic atomization atomizer
超聲波由於其空化機理及對液體的流變性影響等特性，在燃油霧化燃燒中逐步引起人們的重視，尤其在重渣油等高粘度液體的霧化過程中逐步顯示出其優越性，但其具體的霧化機理還需要做進一步的研究在氣泡霧化噴嘴基礎加入懸臂式簧片哨，將超聲波與氣泡霧化相結合是本文討論的主要內容本文從研究超聲波的一些機理入手，討論了超聲動力發生器氣泡霧化以及液體粘度對霧化質量的影響，並通過具體的實驗，根據實驗數據來討論霧化質量隨各種結構參數運行參數的變化規律，以便找到超聲霧化的一些規律，豐富對超聲霧化機理的研究，對超聲霧化噴嘴的設計具有一定的指導意義。Backed by the group of ten governors, the members of the committee resolved to halt the erosion of capital standards in their banking systems and to work towards greater convergence in the measurement of capital adequacy
另一種是歐洲澳大利亞和香港模式。根據這種模式，所有的附屬交易都必須在"臂長"的基礎上所達成。The first marine loading arm on wheels has been developed successfully by dmco, and delivered officially to an enduser of ours. this marks dmco s technically leading position among fluid loading unloading equipment builders, and laid a solid foundation in the highly competitive market
國內第一臺車載式船用輸油臂在德威公司研製成功並正式移交客戶投產使用，它標志著德威公司在流體裝卸設備生產製造行業中的技術能力居同行領先水平，為德威公司在激烈的市場競爭中奠定了堅實的基礎！Then an thorough computer modeling using finite element program with material, geometry and state triple - nonlinear taken into account is carried out on a series of influencing factors, such as comparison with npn - beam splice connection, comparison of varies designed theories, and the varying of fraction coefficient, diameter, grade, pretension and arrangement of bolts, thickness of web and flanges of beam and column, splicing location, axial loading on column, etc. lots of useful conclusions are drawn form computer modelling. finally, design and construction suggestions are given out. this study fills the black in the field of steel beam - to - column connection with cantilever beam high - strength bolted - splicing at both home and abroad
然後，本文在考慮材料、幾何和狀態三重非線性的基礎上，對該連接形式進行了全面的計算機模擬，主要考慮了帶懸臂梁段全螺栓拼接的樑柱連接節點與無拼接的樑柱連接及翼緣對接焊接腹板拼接的連接節點的對比，各種設計方法之間的對比，以及翼緣拼接和腹板拼接的螺栓間距、直徑和數量，拼接點與梁端之間的距離，梁和柱的翼緣、腹板厚度，柱的軸力，接觸面的摩擦系數，翼緣和腹板拼接板的厚度等因素的影響。In this paper, ansys, the software on finite element analysis, is made use of processing the static and modal analysis on the preliminary models and its " modified ones. by analyzing the results, we can conclude that the stresses on the components of the modified models are tended to equilibration and the location of the branches " brace can also influence stresses and translations on the branches. in addition, the values of the intrinsic frequencies on modified models " are larger than the ones on preliminary models, but the ranges of the frequencies on both models are almost same
傳統的弧形閘門的支臂結構基本上都是三角架式的，這主要是因為按平面體系進行計算的傳統設計方法忽略了結構的整體性及弧形閘門的空間結構特點，設計得比較保守，而實際上，將其改為a型結構也存在可行性，本文是利用有限元分析軟體? ? ansys對原模型及修改模型分別進行靜態和固有頻率的計算，通過分析比較其結果可知，支臂改為a型后會使閘門的整體受力趨于均勻，即原模型受力大的部件其應力變小，而原模型受力小的部件其應力會變大；而且a型支臂的支桿在不同的放置位置對支臂的應力和位移變化也有一定的影響。C - frame hydraulic stamping press. types and basic parameter
單臂沖壓液壓機.型式與基本參數Presents a new algorithm for detection of collision between two convex objects to improve the efficiency of collision detection during robot path planning in the robot simulation system, which establishes a linear system whithout variables based on a linear equation system in euclidean space through a series transformation, and concludes that collision is detected if the system contains no dilemma
如何進一步提高碰撞檢測的速度在智能機器人路徑規劃中非常關鍵.為此給出了一種新的碰撞檢測演算法；它是以空間中的平面方程為基礎，將一組平面方程進行幾次代數變換得到一組常數不等式，觀察這組常數不等式中是否含有矛盾不等式即可判定機器臂是否與空間中的障礙物相撞In the paper, present condition and developing tendency of forklifts are presented, design plans of a new developed electrical - driven universal - way forklifts - cpd2hc ~ are introduced, dimensions of its changing direction trapezoid are designed by means of optimized method, static and dynamical stabilities of the forklifts are studied and tested through build model, given conclusions from above researches are of great important to raise design quality and working performance of this kind of forklifts, which lay the foundations of developing more practical, durable and advanced productions
論文闡述了叉車的現狀和發展趨勢，介紹了新研製的cpd2hc型電動萬向叉車的設計方案，並利用優化的方法對轉向梯形臂的幾何尺寸進行了優化設計，論文還研究和驗證了電動萬向叉車的靜態穩定性和動態穩定性，所得結論對于提高這種型式叉車的設計質量和工作性能有重要的意義，為研製更實用、更耐用、性能更先進的產品奠定了基礎。Sleeping on one ' s side with legs outstretched and arms down in what idzikowski refers to as the log, indicates a social, easy - going personality
伊濟科夫斯基稱側臥兩腿伸直雙臂自然下垂的睡姿為圓木式。這種睡姿的人愛交際，容易相處。Thesis this in existing electric capacity, whether it utilize by the ct one mainly reject and mix by suitable partial pressure not low - voltage partial pressure arm not high - handed of cvt electric capacity not insulating, in the middle of and ca n ' t compensate reactor, etc. of voltage transformer, design by sectional mutual inductor that ct combine cvt with, sectional mutual inductance utensil this have electric current mutual inductor and voltage double function of mutual inductor
本論文在現有電容型絕緣電流互感器和電容式電壓互感器製造技術的基礎上，利用ct的主絕緣電容屏作為cvt的高壓分壓臂，配以合適的低壓分壓器、中間變壓器以及補償電抗器等，設計了由ct和cvt相結合的組合式互感器，該組合式互感器具有電流互感器和電壓互感器的雙重功能。The relations between the mode frequency, static characteristic and the framework parameters are studied. a two dimension crossed symmetric cantilever flexure hinge is investigated using finite elements method. the simulation of the mode frequency and the study of the relation between the displacements and the stress indicate that this flexure hinge has good flexibility and linearity between the displacement and the maximum stress
研究了二維復合式懸臂梁柔性鉸鏈模態頻率、靜態特性與鉸鏈結構參數之間的關系；建立了結構參數和力學特性西北工業大學博士論文之間的對應關系;研究了基於復合式懸臂梁柔性鉸鏈的二維十字對稱柔性鉸鏈結構，對其模態頻率以及位移應力特性進行模擬試驗;結果表明此種結構形式的運動對稱性很好;其驅動位移與結構體最大拉壓應力值之間接近線性關系，而且這種結構可以得到100林m以上的運動位移。A great number of calculating results show that eeabs is effective and practicable. in addition, the method has been successfully applied into optimum design of two types of range - changing mechanism of gantry crane and the software systems of optimization design and analytical calculation of straight - arm gantry crane and ? ptimization design and analytical calculation of balance pulley compensation gantry crane ? has been compiled
另外，作者還對基組結式消元法在兩種門座式起重機變幅機構優化設計中的應用做了成功的嘗試，並編制了「變幅補償直臂架門機的優化設計和分析計算」和「平衡滑輪式補償門機的優化設計和分析計算」軟體系統。On the basis of fbg " working mechanism which is expounded on the approach of mode - coupled theory, the paper analyzes and compares the characteristics of some typical demodulation mechanisms. a novel demodulation mechanism for fbg with a cantilever beam to linearly tunable filtering is designed, and the theoretical and experimental analysis on this demodulation mechanism is explained. although the experiment conditions restrict it, the analysis of the measured data show the mechanism has great effect on the practical applicationjiot only in optical communication and sensor systems
在使用模式耦合理論詳盡地闡述了光纖光柵工作原理的基礎上，本論文分析比較了幾種典型的傳感解調方案的特點，然後設計了一套新穎的基於懸臂梁線性調諧濾波的光纖光柵解調系統，並對這套系統進行了理論和實驗研究。盡管由於實驗條件所限，最後的實驗結果與實際值稍有差距，仍得到了許多有益的結論。Firstly, the relationship of atomic force and distance is studied. the scan type of samples and the working mode of probe is confirmed, then pzt is chosen as actuator for micro scan displacement, and optical deflexion method is used to detect the deflexion value of cantilever. after all these work, the system light path design is finished, and its mathematical model is completed
首先，分析了原子力探針系統的中原子力?距離的關系，並確定探針系統的探針的工作模式和樣品的掃描模式，從而選擇壓電陶瓷作為掃描微位移驅動器;採用光學偏轉法檢測微懸臂偏轉量，並選用了psd作為傳感元件，並在此基礎上進行了系統光路設計及其數學模型的建立。In this thesis, development and studies on cantilever bottling pile cad software are made on the base of existing achievement. this is a try of how object - oriented technology applies in the field of structure project software designing
本論文在現有成果的基礎上進行了懸臂式灌注樁cad軟體的開發與研究，是面向對象技術運用於結構工程軟體設計領域的一次嘗試。Bucket wheel stacker reclaimer. types and basic parameters
臂式斗輪堆取料機型式與基本參數We spurn conventional mechanism of cmm and design a new non - contact and non - orthogonal cmm based on robotic technology
機械上摒棄了龍門式、懸臂式等傳統的結構，設計了一種基於機器人的坐標測量機。The system is based on cantilever bottling pile design method. through analysing the cantilever bottling pile design principle and optimum design method, according to guiding theory of soft project, adopting with human - computer interactive design and two - dimentional parameter drawing, the sysytem is made a software that had a friendly ui. it enable user to break away from the design manual, finish all cantilever bottling pile designing and construction drawing on the computer
本系統是以懸臂式灌注樁的設計方法為基礎，通過分析總結懸臂式灌注樁設計原理與優化設計方法，根據軟體工程的指導思想，採用功能完善的人機交互設計和二維參數化繪圖開發出的人機界面友好的軟體，使用戶能脫離設計手冊，在計算機上完成全部的懸臂式灌注樁設計和施工圖繪制工作。分享友人