content coupling 中文意思是什麼
content coupling
解釋
內容耦合-
This thesis mainly introduce designing ~ debugging ~ doing experiment and analyzing result of experiment, the following concretely introduce content of thesis. firstly, according to purpose of designing and making mechatronics coupling experiment bench, demonstrate project of experiment bench, establish mathematics model of experiment bench, which consist of mechanism transmission systems servo amplifier and servo motor
本論文主要介紹機電參數耦合實驗臺的設計、調試、實驗及其實驗結果分析，具體內容如下：首先，從研製機電參數耦合實驗臺的目的出發，論證實驗臺的設計方案，建立實驗臺的數學模型，包括機械傳動系統、伺服放大器和伺服電機。 -
By calculating instability factor in research area, this paper gives some corresponding suggestion. this paper shows engineering instability around instrument foundation and coupling relation to the circumjacent seabed, and research the dynamic response between wave and seabed, and enriches the research content of instability of seabed around instrument foundation and give some appropriate suggestion to foundation planning of ocean engineering, also it prevents instrument, facility and property of state from losing and risking
這篇論文揭示了構築物地基土的工程穩定性及與周邊海域互動禍合關系，研究了淺水區構築物底床在波浪等水動力作用下的動力響應，豐富了構築物周邊水下底坡穩定性研究的內容，為海上工程設施的地基設計提供了良好的理論指導性建議，對保障海上安全生產、保證海洋設施的完整及使國家財產免受損失也有重要的現實意義。 -
Main content in simulation is the spatio - temporal evolution of the set of descriptive variables characterizing tectonic mineralization state under coupling of various processes as following : ( 1 ) variables related to forming and property of ore - forming fluid, such as dissolution rate of minerals ( include metal minerals ) in rock, concentration and saturation of aqueous species in fluid, temperature, pressure, and ionic strength etc. ; ( 2 ) variables related to structural deformation and fluid flow, such as stress, deformation rate, fracture network, porosity, fracture permeability ; ( 3 ) variables related to precipitation and mineralization, such as nucleation rate of gangue and metal minerals, accumulation precipitation of various minerals, etc. ; ( 4 ) spatio - temporal coupling relation of various variables above, such as the coupling relationship between spatio - temporal evolution of fracture permeability and flow and focus of fluid and ore - forming
模擬的主要內容是在各種過程耦合作用下，以下描述構造成礦體系的主要變量的時空演化：與成礦流體的形成和性質有關的變量，如地層中礦物（包括成礦物質）的溶解速率、流體中各組分的濃度與飽和度、流體溫度、壓力、離子強度等；與構造變形和流體運移有關的各變量，如應力與變形速率、巖石孔隙度、構造（斷裂）滲透率等；與沉澱成礦有關的變量，如礦物（金屬礦物和脈石礦物）的成核速率、各礦物的沉澱量等；上述各有關變量間的時空耦合關系，如斷裂滲透率時空演化與流體流動、匯聚和成礦的耦合關系等。 -
Polyurethane composites contained different content of alumina and silicon dioxide particles were prepared, and the alumina particle was processed with two kind of silane coupling agent which models were kh550 and kh560
論文分別制備了al _ 2o _ 3顆粒及白碳黑增強的聚氨酯復合材料，考查了填料種類、填料體積分數、偶聯劑種類對聚氨酯復合材料力學性能及沖蝕磨損性能的影響。 -
Slurry erosion tests were carried out with the manufactured test apparatus in order to study the erosion properties of the polyurethane composites. the results show that the wear resistance of silicon dioxide reinforced polyurethane composites decreased with the increased amount of particles, and the wear resistance of the alunima reinforced polyurethane composites first increased but then decreased. the wear resistance of the alunima reinforced polyurethane composites processed with kh550 coupling agent were maximum at the volume content of 15 %
試驗結果表明，聚氨酯復合材料的沖蝕磨損性能隨白碳黑體積分數的增大而降低，隨al _ 2o _ 3顆粒體積分數的增大先升高而後降低；經過偶聯劑kh550處理的al _ 2o _ 3顆粒增強復合材料耐磨性比經過kh560處理的復合材料高；經過偶聯劑kh550處理的al _ 2o _ 3顆粒增強復合材料在體積分數為15時具有最佳的沖蝕磨損性能。 -
Through multi - factor orthogonal experiment, wood fiber / plastic composite was manufactured to study the effects of polypropylene content on properties of wood fiber / plastic composite by using wood fiber and recycled polypropylene ( pp ) and mdi or ma as coupling agent
摘要通過正交試驗，以木材纖維和廢舊聚丙烯塑料為原料，異氰酸酯或馬來酸酐作偶聯劑，壓制木材纖維聚丙烯復合材料，研究聚丙烯（簡稱pp ）用量對木塑復合材料性能的影響。 -
At this background, though coupling beams with the small ratio of the span to depth have no sufficient test results, in order to satisfy the needs of engineering design, the code for design of reinforced concrete high - rise structure ( jgj3 - 2002 ) still adopt the design method of decreasing the maximum shear force and increasing the quantity of stirrups. but in china code for design of concrete structures ( gb 50010 - 2002 ) the content of seismic design methods for these kinds of coupling beams continue to be blank
在這一背景下， 《高層建築混凝土結構技術規程》 （ jgj3 - 2002 ）為了滿足工程設計需要，對小跨高比連梁在沒有充分試驗結果的情況下，仍採用降低最大作用剪力和提高箍筋用量的設計方法（雖然這種方法已被國外試驗證明在跨高比小於1 . 50的連梁中是肯定不能保證延性要求的） ，而《混凝土結構設計規范》 （ gb50010 - 2002 ）則把這部分內容繼續留作空缺。 -
Improvement of conductivity is more distinct, for example, titanate coupling agent and stearic acid decrease its composite ' s room temperature resistivity 10l - - 102 times, as cb content is 15 % ( w / w )
在導電性能上表現更為明顯，如鈦酸酯偶聯劑和的硬脂酸在炭黑含量為15時，可使材料的電阻率降低1 2個數量級。 -
In these composites, the coupling termination content of pmma decreases while disproportionation content increases. the macromolecular ranging regularity of pmma also increases
上述復合材料中， pmma大分子的終止方式發生偶合終止減少、歧化終止增加的變化，同時pmma整體排列有序度增加。 -
Third, the mechanical properties were conducted by tensile test, and analyzed the relationship between the length, content, coupling agent levels and the tensile strength, tensile modulus of composites films. the result showed that the optimum formulation was the contents of long milled glass fiber 20. 0wt % and coupling agent kh - 550 1. 0wt %
最後，利用動態力學分析（ dma ）和差示掃描量熱儀（ dsc ）對所制備的應變片基底材料進行了熱學性能測試，得到了材料的玻璃化轉變溫度tg 、蠕變和應變回復率。 -
On the same condition of hot - pressing time, hot - pressing temperature and density of composite, the optimum properties of composite were obtained when recycled polypropylene content is 40 % by using mdi as coupling agent and recycled polypropylene content is 50 % by using ma as coupling agent
在熱壓時間、熱壓溫度、復合材料密度相同的條件下，用異氰酸酯（簡稱mdi ）作偶聯劑，聚丙烯用量40 %時復合材料的性能最佳；而用馬來酸酐（簡稱ma ）作偶聯劑，聚丙烯用量50 %時復合材料的性能最佳。 -
Results show that the properties of process droped along with the filling of the diabase fiber, but the balance torque was less than 50nm when the content of the diabase fiber was less than 30phr, the diabase fiber / pvc composite could be processed by traditional technics. ir showed the chemic reaction take place between the coupling agents and the fiber
研究結果表明：盡管輝綠巖纖維pvc復合體系的加工性能隨輝綠巖纖維含量的增加而下降，但當輝綠巖纖維含量小於30份時，輝綠巖纖維pvc體系的平衡轉矩小於50nm ，說明當輝綠巖纖維含量小於30份時能夠採用傳統加工方法進行加工。 -
As a result, it is no need for the endpoints to maintenance any system control task. in this article we propose a compactness coupling conference system architecture, and at the same time we analysis the system key techniques, giving a part of flow chart and pseudocode as examples. main content are given as below : how to use direcshow technique to obtain multimedia data ; multimedia data transport over ip network ; multicast principal and application in the system ; packing and unpacking rtp / rtcp packet so as to control network flow and in this part we introduce spillage arithmetic ; as the core part of the system, conference control and management are the main concern in our design
323框架基礎上提出緊耦合式會議系統體系結構，並以c s結構作為實現模型；本文對會議系統的中心mcu流程進行分析設計，並建立數據結構；該部分還涉及到對各個資源的調度；為了對會議控制有更好的理解，用petri網描述了會議控制會議管理的過程並提出了靈活的授權管理機制；對服務器端的數據通信設計了多播通信的實現方案；本文簡單回顧了directshow技術的應用，並在此基礎上實現了多媒體數據的採集和回放；為實現多媒體在網路上實時傳輸選擇不可靠傳輸協議udp ，為使數據能正確回放，採用了rtp和rtcp協議。 -
Then tension and bending strength reach to maximum when the wood flour content is 40 %. the addition of coupling agent ( maleic - anhydried - modified polystyrene, maps ) can improve these properties described above
當添加20的偶聯劑時，木粉含量為40和50的復合材料的吸水量減少了一倍；存儲模量高於未加偶聯劑的復合材料；彎曲強度和拉伸強度分別增加了10和40以上。 -
The main content of this paper contains : summarizing the foundational theory of vibration and noise, and establishing the analysis and computation flow chart of noise acoustic field of mechanical vibration ; taking a close drum shell as the research object, analyzing its dynamic characteristics and vibration response using finite element method, then going with the structural - acoustic coupling analysis based on the acoustic model analysis of the aerial intracavity of the close drum shell
論文的主要內容包括：對振動和噪聲的基礎理論進行了概述，並建立了結構振動噪聲聲場分析計算的流程圖。以封閉鼓形薄殼為分析對象，運用有限元法分析了其的動態特性及振動響應；同時在分析了封閉鼓形薄殼空氣內腔的聲學模態的基礎上，對其進行了聲固耦合分析；並作了該結構模型的外場聲固耦合諧響應分析。 -
In this paper, the calculating model for coupling function of water movement and heat conduction in subgrade is established based on the theory of continuum mechanics and the thermodynamics. the load function ’ s influence to frost heave is qualitative consideration in the model. the relationship of moisture content and temperature change with time and depth is calculated by use of matlab
本論文基於連續介質力學和熱力學理論，建立了路基土的水分運移和熱傳導耦合模型，並定性的考慮荷載對凍脹性的影響，利用matlab數值計算軟體，求解出了路基土在凍結過程中的含水量和溫度在不同時間隨深度的變化關系。 -
With 20 % coupling agent, composites with 40 % and 50 % wood - flour content gain better storage moduli ( e " ) than these without coupling agent, and composites with 40 % and 50 % wood powder content attain the increments in tension and bending strength of 10 % and 40 % respectively, the rotate speeds of extruder affect the mixing of wood powder, coupling agent and polystyrene
3 ）雙螺桿擠出機的轉速影響著木粉偶聯劑和聚苯乙烯的均勻混合程度。研究發現，雙螺桿轉速為40rpm時，復合材料性質好於其它轉速。 4 ）木粉含量為40 ，偶聯劑含量為20的復合材料其力學強度（拉伸強度為40 . 22mpa ，彎曲強度為76 . 192mpa ）和存儲模量明顯高於其他工藝條件的復合材料。 -
Firstly, the condition of modification of precipitation white carbon, modified by silane coupling agent ( wd10, wd70 ), and the properties of polyacrylate membrane were researched. the results showed that the modified white carbon show excellent hydrophobic, and their filling polyacrylate membrane, filled with white carbon modified by wd - 70 was more effective, were improved on flexibility, adherence and resist impact, and it can be unavailable because of more content ratio of silane coupling agent
然後，採用上述改性的白炭黑粒子進行了聚甲基丙烯酸甲酯包覆研究，討論了其包覆機理和工藝條件對包覆效果的影響，並將此膠囊化粒子與聚丙烯酸酯乳液進行復合，對其塗膜性能進行了研究，實驗表明：以疏水性白炭黑粒子為種子才能實現膠囊化。 -
The central content of this thesis is theoretic and experimental analysis on involute cylinder worm gear under the coupling of the load and the mounting errors
本文的中心內容是漸開線圓柱蝸桿承載嚙合理論與實驗分析。為此，論文在以下幾個方面開展研究。
分享友人